Storage Tent Basic 2-in-1, 3x6 m PE, White
Product number ST18700
Basic storage tent 2-in-1 with a strong cover and a sturdy frame made of galvanised steel tubes. This innovative storage tent has two functions – a storage tent with closed sidewalls or a marquee with sidewalls with large Georgian style windows (both types of sidewalls enclosed). A functional and affordable alternative to both our storage tents and marquees in PVC.
NB! Small details may vary from the photos shown.
Recommended accessories - purchased separately
Related products
Chat with an Expert
Recommend to a friend
Request a call
- Budget alternative to PVC marquees
- PE covers and frames are fully recyclable
- Safety and Quality guaranteed since 1993
- Temporary construction
- Wind- and waterproof cover in sturdy PE
- Strong and durable galvanised steel frames
- Spare parts available to ensure longevity of products
- Personal advice and service
Product specifications:
3.00 m.
6.00 m.
2.00 m.
2.55 m.
Strong polyethylene tarpaulin 200 g/m²
Strong polythylene tarpaulin 200 g/m²
Galvanised steel tubes
38x1.1 / 42x1.2 mm
100% Waterproof
White
71.00 kg
UV-resistant
Ground pegs
EN 1090-1:2009+A1:2011
1x2/2x2 m.
Box 1: 55.0 x 15.0 x 66.0
Box 2: 55.0 x 17.0 x 65.0
Box 3: 20.0 x 11.0 x 148.0
Box 4: 27.0 x 14.0 x 199.0
Box 5: 38.0 x 15.0 x 52.0
Box 2: 55.0 x 17.0 x 65.0
Box 3: 20.0 x 11.0 x 148.0
Box 4: 27.0 x 14.0 x 199.0
Box 5: 38.0 x 15.0 x 52.0
Product info:
Safety Advice
Condensation
Note: Temperature changes and moisture in the air can cause dew or condensation to appear outside and inside a marquee. This is normal and does not mean the marquee is leaking.
- Do not put up your tent in extremely bad weather – i.e. strong winds, heavy rain or snow. If you have put up the tent already, be sure to take it down immediately in case of bad weather.
- In some countries, approval is needed to set up a tent larger than 75 m².
- In the case of strong wind, it is your responsibility to secure the tent adequately and prevent it from injuring materials and people.
- Your tent is intended as a temporary form of coverage. It is to be used on an occasional and non-permanent basis only.
- When it rains, a risk emerges that water pile up on the roof of your tent and causes the tent to collapse. It is your responsibility to keep the roof cover free of water. Be sure that it is fully extended and please remove standing water that builds up during rainfall.
- When it snows, a risk emerges that snow pile up on the roof of your tent. Heavy snow may cause the tent to collapse. It is your responsibility to remove snow from the roof of your tent and save your tent from damage.
- Please be sure that your tent is completely dry before you take it down and pack it up. Thus you avoid mould and mildew.
- Do not pack or unpack your tent at subzero temperatures. Doing so can cause crazing – especially to tent windows in sidewalls.
- Do not use open fire, welding equipment or other sources of ignition, inside or close to the tent.
- Please note that the FleXtents warranty applies only to the normal use of the product happening in accordance with the written instructions in your manual. The warranty does not cover normal wear and tear. Neither does it cover damage, defect, wear and tear caused by misuse, poor maintenance, abuse, unauthorized modification or exposure to bad weather conditions.
- We recommend you to check whether your tent is covered by your home contents insurance.
This structure is not tested for specific snow and wind loads. When it snows, it is your responsibility to remove the snow from the roof of the structure in order to secure it from damage.
FAQ
Manual
Marquee assembly video
Purchase Spare Parts for
Storage Tent Basic 2-in-1, 3x6 m PE, White